Cheapest ❤️ Doug Ritter Knives and Gear Doug Ritter Mini-RSK® MK1-G2 Knifeworks Exclusive – G-Mascus® Blue G-10/Stonewashed 👍

The next generation of survival authority and Knife Rights Chairman Doug Ritter’s popular Mini-RSK® Mk1 ambidextrous folder, manufactured by Hogue, is now available EXCLUSIVELY from KnifeWorks. The Mini-RSK® Mk1-G2 (Generation 2) is an upgraded version of the original Mini-RSK® Mk1 that Ritter introduced in 2004. It features a G10 handle, Ritter’s highly regarded wide-chord, high flat-ground drop point blade in CPM 20CV, 2.9 inches long, the ambidextrous ABLE™ Lock and other refinements. Ritter said, “I don’t believe that you will find a better overall value in a USA-made folder for everyday utility or survival. And, like the original, it’s a knife you can bet your life on™.”

The Mini-RSK® Mk1-G2 is a compact, more conveniently sized, or more politically correct, version of the highly praised 3.44-inch original. It is a superb utility folder and it will meet blade length restrictions that in some jurisdictions or locations still limit carry knives to a maximum three-inch blade length (albeit fewer than before Ritter started Knife Rights)

“This is a fantastic knife…It’s just a great, great utility knife, field knife, tactical knife. Doug Ritter, Knife Rights, Hogue; dynamite combination, dynamite knife…I love the knife.”
      — Joe Paranee (knife & sword reviewer, collector, hunter)

Ritter explained, “when Benchmade advised me in the summer of 2016 that as part of a restructuring that they were no longer going to produce my RSK knives, it was quite a shock. These highly regarded knives have been my primary source of income for the last decade. That income is what has allowed me to spend the majority of my time on Knife Rights’ efforts to free knife owners from irrational knife restrictions. This has resulted in 32 bills repealing knife bans enacted in 22 states, eight anti-knife bills defeated and numerous litigation victories in the past eight years. The sales also support my Equipped To Survive™ site and my participation on numerous national and international safety and survival standards committees. Walking away from Knife Rights and ETS due to the loss of knife income simply wasn’t an option I would consider.”

Ritter continued, “a number of knife companies approached me after I announced that Benchmade discontinued production, eager to take on this successful line of knives.” In the end, Ritter has teamed with Hogue, Inc. to produce the next generation RSK® Mk1-G2 and Mini-RSK® Mk1-G2. Ritter said, “in Hogue I believe I have found a partner who understands my goals, is dedicated to producing world-class knives in the U.S. with customer service second to none. They are also committed to helping Knife Rights continue to forge a Sharper Future for all Americans.”

Since Ritter first saw the original Benchmade prototype knife with the ambidextrous AXIS* lock, designed by knifemakers Bill McHenry and Jason Williams, he has been a huge fan. Ritter took note that the patent on that outstanding lock expired in 2016.

Ritter has dubbed the improved version of this lock used in this next generation Mini-RSK® Mk1-G2 the ABLE™ Lock—standing for “Ambidextrous Bar Lock Enhanced.” The ABLE™ Lock incorporates superior finish and geometry for smoother operation, a tougher lock bar and Wolff omega springs.

W.C. Wolff Co. is famed worldwide for their superior springs engineered and manufactured in Newtown Square, Pennsylvania. Wolff springs are respected for outstanding durability, thus providing enhanced reliability for the ABLE™ Lock. Wolff also provides the torsion springs used in Hogue’s automatic knives.

The ABLE™ Lock liners are secured by two offset screws. The additional screw and offset design provides added strength and rigidity to the knife and lock assembly.

Jimping on the liners, handle and the blade thumb ramp have been redesigned to be more thumb-friendly, while still providing plenty of purchase.

The Mini-RSK® Mk1-G2 blade retains the same widely acclaimed 2.9-inch drop point profile with a high flat grind as Ritter designed for the original Mini-RSK™ Mk1. It is produced from premium Crucible Industries CPM 20CV powder metallurgy high carbon stainless steel produced in the USA. It has a stonewashed finish to provide added corrosion resistance and which also helps hide scratches. The blade is cryogenically processed to achieve a hardness of HRC 61-62 for an optimum blend of edge-holding and toughness.

The blade rides between phosphor bronze washers for the utmost in simplicity and reliability. The pivot screw is adjustable using a standard Torx driver. Dual thumbstuds, which carry through the tri-wing theme of the ABLE™ Lock lockbar, allow for ambidextrous opening.

 

The blade is laser engraved with Doug Ritter’s logo and the steel type on the front and the Hogue logo and “USA” on the reverse.

The handle scales are CNC-machined from black G10 high-pressure laminate aerospace composite. Compared to the original Mini-RSK® Mk1, it provides improved ergonomics. An “index bump” on the underside offers added security and comfort. The radial and checkered pattern machined into the surface combines effective grip with stunning esthetics. Ritter credits a fixed blade handle design by Les George on a Hydra Fighter he donated to Knife Rights’ Ultimate Steel 2015 fundraiser as inspiration for that motif. The handle is 0.16 inches (4 mm) longer to allow for the lanyard hole to be located at the tail end of the handle.

The handle incorporates open construction with two standoffs. Compared to the solid back of the original Mini-RSK Mk1, this allows for easier cleaning. The Mini-RSK® Mk1-G2 is neutrally balanced, Ritter’s ideal for this size knife. The RSK® Mk1-G2 weighs in at a svelte 2.6 oz (75g) with the clip.

The Mini-RSK® Mk1-G2 carries with a custom stonewashed stainless steel deep-carry pocket clip. The clip is reversible for ambidextrous tip-up carry. While retained by two screws, a standard 3-screw pattern (Benchmade, Spyderco, Emerson, etc.) is provided so that owners can exchange the clip for any of the wide variety of aftermarket and custom clips available. Brass inserts provide secure retention of the clip screws.

The Mini-RSK® Mk1-G2 comes in a zippered pouch embroidered with the Doug Ritter/Hogue logo.

Like every Hogue-built knife, the Mini-RSK® Mk1-G2 is manufactured in the USA and is backed by three generations of manufacturing expertise and is covered by Hogue’s recently updated limited lifetime warranty that accommodates owner maintenance and disassembly.